General Contracting · Argyle, Texas

General Contractor Argyle TX

General Contractor Argyle TX means one accountable builder for the whole job. From Harvest and Canyon Falls to the ranch homes along US 377, The JBN Group plans, schedules, and builds remodels, kitchens, and additions across Argyle.

Since 1996Serving North Texas homeowners
Project PlanningPermit requirements reviewed
In-Home ConsultationWe meet you at the property
Insured ContractorProfessional remodeling team
One contractor, multiple trades

Who Should You Hire as a General Contractor in Argyle TX?

Who is a general contractor in Argyle, TX I can hire for a remodel? The JBN Group, a family-owned general contractor working in Argyle from our Denton base since 1996. We run whole-home remodels, kitchen remodels, and additions with our own project managers, and we are fully insured. Call 469-312-0990 to start a quote.

Argyle splits into two housing stories. Harvest, Canyon Falls, and Argyle Meadows are young homes with builder finishes that already feel plain. Old town and the US 377 corridor hold ranch homes on acreage, solid but closed off and dated.

Both kinds need the same thing: one contractor who plans the whole project and answers for every trade. That is the work General Contractor Argyle TX hiring is really about, and it is the work we run every week.

Before construction begins, we review the existing home, proposed work, property conditions, structural considerations, and the trades involved.

  • Project coordination: multiple trades organized around one remodeling plan
  • Permit review: requirements reviewed for the property and scope
  • Structural planning: layout and framing changes evaluated before construction
  • One primary contractor: one point of contact for the overall project

Call 469-312-0990 and we will meet you at your Argyle kitchen table to plan the project out

What we build

General Contracting Services in Argyle

As your general contractor, we take on the full project, not just one room of it. These are the jobs Argyle homeowners hand us most.

Open living room remodel in a Harvest neighborhood home in Argyle

Whole-Home Remodeling

full renovations for Argyle ranch homes where the kitchen, baths, and layout all date to another era. We rebuild the plan around how your family lives now.

Kitchen remodel with large island in an Argyle ranch home

Kitchen Remodeling

In Lewisville the kitchen usually shows the home's age first: closed-off 1980s and 90s layouts, short on storage and light. We open what the structure allows, reset cabinets, counters, and lighting, and shape the room around how your household cooks and gathers.

See our home remodeling work in Argyle →
Contractor reviewing addition plans with Argyle homeowners at their table

Home Additions

Room to grow on some of the area's larger, older lots: primary suites, second stories, bigger kitchens, home offices. We resolve roofline, foundation, and setbacks, plus Old Town or HOA constraints, before plans go final.

General Contractor Argyle TX

Design and Build

Bearing walls come down, additions tie in, and electrical, plumbing, and HVAC move together. These are the jobs where sequencing, not just skill, decides whether it finishes on time.

Your Harvest Kitchen Deserves Better Than Builder Grade

Builders finish fast and plain. Five years in, the counters stain, the cabinets feel thin, and the layout still fights you. We rework Argyle kitchens and living spaces to a standard the tract builders never aimed for.

Discuss Your Project
Tuned to Argyle lots and streets

Contracting in Harvest, Canyon Falls & Old Town Argyle

Harvest and Canyon Falls brought master-planned streets to Argyle in the mid 2010s, and Argyle Meadows filled in near the schools. Those homes are young, but their finishes were chosen by a builder budget, not by a family.

The older town runs on acreage along US 377, where ranch homes sit deep on their lots and every property drains, slopes, and sets back differently. General Contractor Argyle TX work has to read each site on its own terms.

Argyle ISD teaches local kids, and Eagle football owns Friday nights each fall. FM 407 and US 377 cross in town, and I-35W keeps Denton and Fort Worth within an easy drive.

The JBN Group serves Argyle and surrounding North Texas communities.

Does a remodel in Argyle need a town permit? Most structural work does. The Town of Argyle Community Development Department charges residential remodel permits by the square foot and inspects before work gets covered and again at completion. Homes out in the ETJ can fall under different rules, and we confirm which apply to you.
Contractor walking an Argyle acreage property with homeowners
Permits and property requirements

Argyle Permits & Inspections

Applications go through the town online portal with us named as your contractor. Review checks structure, setbacks, and site rules before the permit issues and inspections get staged through the build.

Master-planned streets like Harvest and Canyon Falls add an HOA layer for anything visible outside. We send the architectural review paperwork in early so approval time never stalls your start date.

The JBN Group reviews the project scope and discusses applicable permit and property requirements as part of the planning process.

A North Texas remodeling company since 1996

Why Argyle Families Hire The JBN Group

We have built across Denton County since 1996, and Argyle sits minutes from our Denton base. Small-town jobs run on reputation, and ours gets checked at the grocery store and the school lot.

  • Family-owned since 1996: the same family still runs the company and still answers for every project.
  • Acreage and subdivision alike: we work new Harvest streets and old US 377 ranches in the same week.
  • Fully insured: coverage on our crews and your property for the whole project.
  • Close to home: our Denton office is a short drive down FM 407 from your front door.
  • No runaround: one manager, one phone number, and answers when you call.
One parent company, specialized divisions

The JBN Group and Our Specialized Divisions

The JBN Group handles general contracting, whole-home remodeling, kitchen remodeling, home additions, and multi-trade renovation projects. When the project centers on a specialty service, one of our dedicated JBN divisions can handle that work.

Nearby service areas

Also Serving Towns Around Argyle

Denton, Lantana, Bartonville, Northlake, Justin, Copper Canyon

View all JBN Group service areas →

Questions Argyle homeowners ask

Questions Argyle homeowners ask us

What does it cost to hire a general contractor in Argyle?

Project size drives it. Focused Argyle updates can start as low as $10,000, while a full ranch renovation or large addition runs well beyond that. We walk your home, write the scope, and price the real work before you commit. To get your free quote, reach us at 469-312-0990.

What does a general contractor actually do on my Argyle project?

We plan the scope, sequence every trade, pull permits, schedule inspections, and manage quality daily. You get one contract and one person accountable for the finished result, instead of juggling a dozen separate hires.

How long will a remodel in Argyle take from start to finish?

Kitchens usually run four to eight weeks, whole-home renovations three to six months, and additions longer once foundations and inspections are counted. We hand you a written schedule before demo and update it as the job moves.

Who pulls the permits for work in Argyle, us or you?

We do. Our team files with the Town of Argyle, pays the square-foot permit fees as part of your scope, and meets inspectors on site. If your address sits in the ETJ, we confirm the county path instead.

Can our family stay in the house while you work?

In most Argyle projects, yes. We seal work zones with dust barriers, keep a path to bedrooms and a working bath, and clean up daily. Big additions often let you live almost normally while the new space rises.

Do you use your own crews or hand the work to subcontractors?

Our own crews handle the core building work, and trusted trade partners cover specialty steps like electrical and plumbing. Either way, our project manager directs everyone on site and answers for the standard of the work.

We know what we want changed but not how it should look. Can you help design it?

That is a normal starting point. Our design and build process turns your list into drawings and finish selections, priced before construction. You approve every choice on paper, not mid build.

How do we get an Argyle project moving?

Call 469-312-0990 and tell us what you want the house to do. We will visit, measure, and leave you a written scope and price. No pressure to sign anything on the spot.

Start with an in-home consultation

Your Argyle Project Starts With One Conversation

Whether it is a Harvest kitchen or a ranch off US 377, the first step is the same: walk the home with us and talk honestly about scope and budget. We will draw it, price it, and build it.

Call 469-312-0990 to schedule your consultation.

Scroll to Top

Book Your Free In‑Home Consultation